Concrete is one of the best options available for industrial flooring as it performs admirably well and lasts longer than other materials. Concrete flooring stands out from other materials because it can withstand extreme wear and tear without increasing costs or jeopardizing workplace safety.
Concrete painting doesn't have to be challenging; it's simpler than you might imagine. You can turn your chilly, grey concrete floor into a cozy, welcoming living area by following the steps we'll show you. Therefore, to carry out industrial floor painting in India, you must consider the following points.
1. Thorough cleaning of the area must be done
Cleaning the area thoroughly is the first step in getting ready concrete for painting. Any surface debris that can be quickly vacuumed or swept up should be removed when preparing new or old concrete surfaces for painting. The area must be clear of leaves, dirt, trash, grass, rocks, and other debris before moving on to the next step. Use a strong detergent to scrub away any grease or stains until the surface is spotless. To achieve the best results, remove any outdated paint.
2. Applying etching solution and filling the gaps and cracks
Apply an etching solution after cleaning and drying the concrete. Any efflorescence (salt deposits) will be removed in this step, which will also prepare the surface for painting. Make sure the surface has been completely painted over before etching. Fill any cracks, holes, or other surface flaws to create a smooth surface prepared for painting. Any pieces that protrude from the concrete must be sanded, ground, or chipped smooth after the cracks have been filled. This is a crucial step because any exposed areas are vulnerable to moisture mitigation and water infiltration, which will later cause problems. The area where the floor meets the wall should also be filled when preparing a concrete garage floor for painting or other spaces with a floor-wall joint.
3. Test for moisture and a thorough wash
Wash the area thoroughly and allow it to completely dry after the sealer has had time to set (up to 24 hours). Perform a moisture test after it has dried to ensure that any moisture that was trapped has been released.
4. Select the right paint
Today's market offers a wide variety of options for concrete floor paint. It's wise to know what paint to buy whether you're painting your front stoop, basement floor, garage floor, or even both. After preparing the concrete surface and selecting your desired colour, apply the first coat of paint and allow it to dry thoroughly — it takes about 4 hours. Remove any lumps or flaws from the concrete surface by sanding or scraping after the initial coat has dried completely.
Make sure to paint any areas that the first coat missed when you apply the second coat. To achieve a uniform color, the second coat should be applied opposite from the first coat. After painting, give the concrete surface at least a few days to completely dry.
5. The process of cleaning up
Now, wash your paintbrush in hot water with dish soap. After you're done, immediately wash your roller in hot water with dish soap (or discard it). Let the paint finish drying completely (minimum of four hours). Use a putty knife to score the edge where the tape meets the floor as you gradually remove the tape to stop the new paint from flaking.
To find the right floor painting services, you should check the services provided by the floor painting service provider. For industrial floor paint in India, many service provider would offer you their services. However, you should opt for the most reliable one. Taralac would be the best example of this. They would provide you with the best industrial floor paint in India. Their paints are of excellent quality and would also be an affordable option for you. The industrial floor paint provided by them is also reliable which would lessen your stress.